Idea gallery

Hangar & warehouse

High ceilings, steel framework, open volume: a hangar isn't lit like a garage. Drag the handle to see the difference.

0.55 hex/m²Base density
+50%Above 3 m
6,500 KNeutral white
After Hexeli installation
Before installation
Before After

Before: a few high-mounted spotlights give uneven lighting and plenty of dark areas. After: mounted under the framework, the LED grid spreads powerful, even light across the whole workshop.

After Hexeli installation
Before installation
Before After

Before: despite many spotlights, the lighting stays concentrated and leaves dark areas between vehicles. After: the hexagonal grid covers the whole ceiling and spreads powerful, even light throughout the hangar.

The layout for your hangar

Floor area, height under the framework, type of structure: we'll tell you how many hexagons you need and how to mount them.

View the white kits

Frequently asked questions

Hangar lighting: your questions

High ceilings change three things: density, mounting and maintenance.

How many hexagons for a hangar?

Start from 0.55 hexagons per m², then add 50% as soon as the height exceeds 3 m. For 200 m² under a 5 m ceiling, that's about 165 hexagons — height drives the count, not floor area alone.

Why so many extra panels?

Because light thins out with distance. At 5 m, a grid sized for 2.50 m leaves the floor feeling dim, even though the ceiling itself looks well lit.

How do I mount on a steel framework or metal deck roofing?

Always onto the load-bearing structure, never into the sheet metal or a suspended panel. The fixings depend on the substrate: solid concrete, hollow concrete, metal decking and timber framing don't take the same anchors.

Should I lower the panels to get more light?

It's an option when the work zone is clearly defined: bringing the source 1.50 m closer makes a real difference to comfort at floor level. But always keep the clearance needed for vehicles and machinery to pass.

Will my electrical circuit handle the grid?

Check it before you buy. A large grid can draw more power than the existing lighting circuit supports. In commercial premises, work on the electrical panel is a job for an electrician.

What about maintenance at 5 m up?

Plan for it from the design stage. A simple yearly clean calls for a lift platform or scaffolding: better to plan accessible bays than to discover the problem after installation.

The hangar is open to the public: are there any requirements?

Yes. Premises open to the public must have independent emergency lighting that takes over in the event of a power cut: an LED grid never counts as such. The applicable regulations depend on the type of establishment — have them confirmed by a professional.

Dust, humidity, temperature swings?

An uninsulated hangar sees big temperature swings and a lot of dust. Respect the stated mounting distances, and use a suitable ingress protection rating over wash areas or areas exposed to the weather.

Have a question that's not listed here?

Give us your floor area and ceiling height, and we'll reply with a costed layout.

Contact us

The Hexeli benchmark

Lighting a hangar or a high-ceilinged space

In a hangar, it's not the floor area that sets the number of panels, it's the height. A grid sized as for a garage leaves the floor feeling dim, even though the ceiling looks well lit.

Three things to settle before buying: density corrected for height, mounting onto the actual structure, and access for maintenance.

0.55 hex/m² Base
+50% Above 3 m
6,500 K Neutral white

Height drives the count

Above 3 m, allow 50% more panels for the same area. That's not a luxury: it's what separates a well-lit space from one where you squint.

Mount onto the structure

Metal decking, steel framework, suspended panels: always go back to the load-bearing structure. The standard fixings supplied don't suit every substrate.

Lower the grid over the work zone

When a zone is clearly defined — repair bay, sorting area — lowering the grid by 1 to 1.50 m noticeably improves comfort, as long as you keep the clearance for vehicles.

Plan for access

The yearly clean recovers a real share of brightness. At 5 m, it takes equipment: better to plan for it than to give it up.

Number of hexagons by height
Area Under 3 mAbove 3 m
100 m² 5583
150 m² 83124
200 m² 110165
300 m² 165248
500 m² 275413

Basis 0.55 hexagons per m², increased by 50% above 3 m. Sizing values to be confirmed with your electrician for commercial premises.

View the white kits

White LED

• CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT • CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT • CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT • CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT • CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT • CE CERTIFIED • 5-YEAR WARRANTY • INDIVIDUALLY REPLACEABLE BARS • PAY IN 3 INTEREST-FREE • FRANCE-BASED CUSTOMER SUPPORT